第09週 熔接:結構/除料清單、逆向工程

關於此課程
熔接:結構/除料清單、逆向工程
Weldments: Structure/Material Removal List, Reverse Engineering
【教材】
1. 書籍 : SolidWorks 專業工程師訓練手冊 : 集錦2 : 熔接+鈑金+曲面+模具
2. 模型檔案 : 點擊下載資料夾→06 solidworks工程師訓練手冊[6]集錦2 結構與管路-鈑金-曲面-模具
你將會學習到什麼?
- 熔接與結構工程技術:投影片說明熔接效益和結構配置的考量
- 熔接工具列:說明每個指令應用與特點
- 結構成員與修剪:重點說明應用,有效率完成結構設計
- 多本體工程圖:於零件產生的多本體工程圖,有效率產生該技術文件
- 自訂輪廓:針對不足的輪廓自行定義該特徵資料庫
- 結構系統:進階的結構成員與修剪
課程內容
第01章 結構工程技術【PPT】(Structural Engineering Techniques)
-
-
-
08:54
-
11:32
-
05:53
-
04:44
-
09:29
第02章 結構成員與管路 (Structural Members and Piping)
-
01:31
-
0 指令位置與介面 (Command location and interface)
13:36 -
1 結構成員的選擇項目 (Selection options for structural members)
13:36 -
2 熔接環境 (Welding environment)
08:07 -
3 結構成員本體 (Structural member bodies)
03:47 -
4 新群組與多個結構成員 (New group and multiple structural members)
07:01 -
5 設定:合併本體 (Settings: Merge bodies)
02:25 -
6 縫隙 (Gaps)
03:11 -
7 管路 (Piping)
24:48 -
8 圓管底座 (Circular pipe base)
02:07 -
9 椅子 (Chair)
03:06 -
10 爬梯 (Ladder)
04:11 -
11 爬梯+人籠 (Ladder + cage)
08:48 -
12 樓梯 (Stairs)
25:10 -
13 欄杆 (Railing)
03:24 -
14 護欄+邊框 (Guardrail + frame)
17:03
第03章 結構成員 : 定位輪廓 (Structural Members: Positioning Profile)
-
02:53
-
0-1 定位輪廓介面與原理 (Positioning profile interface and principles)
09:55 -
1 鏡射輪廓 (Mirrored profile)
00:59 -
2 對正 (Alignment)
02:40 -
3 旋轉角度 (Rotation angle)
00:45 -
4 定位輪廓 (Positioning profile)
11:39
第04章 修剪與延伸 (Trim and Extend)
-
01:37
-
0-1 修剪指令認知 (Understanding the trim command)
03:10 -
1 底端修剪 (Bottom trim)
15:40 -
2 底端斜接 (Bottom miter)
07:51 -
3 底端對接 (Bottom butt joint)
03:43 -
4 內部修剪-角落類型 (Internal trim – corner type)
06:14 -
5 內部修剪-角落處理視窗 (Internal trim – corner handling window)
05:46 -
6 干涉檢查 (Interference check)
02:15 -
7 修剪注意事項 (Trim considerations)
01:06 -
8 修剪練習 (Trim exercises)
12:56
第05章 連接板 (Gusset Plate)
-
03:33
-
0-1 指令位置與介面 (Command location and interface)
00:12 -
1 支撐面 (Support face)
01:15 -
2 輪廓 (Profile)
02:56 -
3 位置 (Position)
05:35 -
4 封板設計 (End plate design)
06:15
第06章 頂端加蓋 (End Cap)
-
00:34
-
0-1 指令位置與介面 (Command location and interface)
00:42 -
1 參數 (Parameters)
02:17 -
2 偏移 (Offset)
02:09 -
3 角落處理 (Corner treatment)
00:41
第07章 圓角熔珠 (Fillet Bead)
-
05:07
-
0-1 指令位置與介面 (Command location and interface)
00:42 -
1 箭頭邊 : 完全長度 (Arrow side: Full length)
05:21 -
2 箭頭邊:間斷與交錯 (Arrow side: Intermittent and staggered)
01:13 -
3 完全貫穿、部分貫穿 (Full penetration, partial penetration)
45:00 -
4 法蘭熔接 (Flange welding)
00:55
第08章 熔珠 (Weld Bead)
-
00:43
-
0-1 指令位置與介面 (Command location and interface)
01:19 -
1 熔接路徑與設定 (Welding path and settings)
05:04 -
2 來源/目標長度 (Source / target length)
00:37 -
3 間斷熔接 (Intermittent welding)
00:55 -
4 顯示熔接位置 (Display welding location)
03:04
第09章 邊界方塊與網格線系統 (Bounding Box and Grid System)
-
05:18
-
0-1 指令位置與介面 ( Command location and interface)
04:06 -
1 除料清單建立邊界方塊 (Creating a bounding box for the cut list)
03:17 -
2 進階邊界方塊 (Advanced bounding box)
03:37 -
3 組合件的邊界方塊 (Bounding box for assemblies)
00:45 -
4 網格線系統 (Grid system)
06:37
第10章 除料清單與熔接環境 (Cut List and Weldment Environment)
-
00:40
-
0-1 除料清單右鍵作業 (Right-click operations on the cut list)
03:11 -
2 除料-清單-項次 (Cut-list items)
07:27 -
3 子熔接 (Sub-welding)
01:14 -
4 除料清單排序選項 (Cut list sorting options)
05:52 -
5 熔接組態 (Weldment configurations)
02:18 -
6 除料清單屬性視窗 (Cut list properties window)
04:31 -
7 產生/轉換熔接環境 (Generate/convert weldment environment)
07:37 -
8 文件屬性-熔接 (Document properties – weldment)
00:15
第11章 熔接爆炸圖與工程圖 (Weldment Exploded View and Drawings)
-
00:19
-
1 零件組裝零件 (Part assembly)
02:32 -
2 零件爆炸圖製作 (Creating an exploded view of parts)
02:08 -
3 多本體工程圖 (Multi-body drawings)
10:02
第12章 自訂熔接輪廓 (Custom Weld Profile)
-
01:05
-
1 製作草圖特徵庫 (Create sketch feature library)
02:08 -
2 定義熔接輪廓位置 (Define weld profile location)
01:10 -
3 取得熔接輪廓:ToolBox-結構鋼 (Obtain weld profile: ToolBox – Structural steel)
01:19 -
4 取得熔接輪廓:3D ContentCentral
01:15
第13章 橫樑計算器 (Beam Calculator)
-
00:13
-
0-1 指令位置與介面 (Command location and interface)
02:03 -
1 負載類型與功能 (Load types and functions)
00:38 -
2 計算類型:橈曲 (Calculation type: Bending)
00:58 -
3 計算類型:應力 (Calculation type: Stress)
00:05
第14章 結構系統 (Structural System)
-
05:41
-
0-1 指令位置與介面 (Command location and interface)
08:05 -
1 熔接(熔接特徵)Welding (Weld features)
00:31 -
2 結構系統與環境 (Structural system and environment)
04:23 -
3 結構系統組成 (Structural system components)
05:17
第15章 結構系統-角落管理 (Structural System – Corner Management)
-
01:50
-
0-1 角落管理的共同應用 (Common applications of corner management)
05:28 -
1 簡單 (Simple)
05:02 -
2 雙成員 (Double members)
02:44 -
3 複雜 (Complex)
03:00
第16章 結構系統-主要成員 (Structural System – Primary Members)
-
00:33
-
0 主要成員與次要成員:輪廓 (Primary and secondary members: Profiles)
06:16 -
0-1 類型:路徑線段 (Type: Path segments)
09:44 -
2 類型:平面參考 (Type: Plane reference)
04:39 -
3 類型:點與長度 (Type: Points and length)
04:17 -
4 類型:面參數 (Type: Face parameters)
01:00
第17章 結構系統-次要成員 (Structural System – Secondary Members)
-
00:37
-
0-1 次要成員介面與原理 (Interface and principles of secondary members)
02:57 -
1 支撐平面成員 (Supporting plane members)
08:26 -
2 點之間成員 (Members between points)
08:53 -
3 上至成員 (Members up to another member)
01:41
第18章 連接元素 (Connection Elements)
-
01:15
-
1 定義連接元素 (Defining connection elements)
07:49 -
2 插入連接元素 (Inserting connection elements)
13:37 -
3 複製排列連接元素 (Patterning connection elements)
02:13 -
4 複製排列結構系統 (Patterning structural systems)
00:39
第19章 結構設計模組化 (Structural Design Modularization)
-
01:28
-
1 椅子 (Chair)
00:45 -
2 欄杆 (Railing)
00:49 -
3 爬梯 (Ladder)
01:01 -
4 爬梯+人籠 (Ladder + Cage)
01:02 -
5 樓梯 (Staircase)
02:04 -
6 機架+護欄 (Frame + Guardrail)
01:36
solidworks 線上課程證書(solidworks certifacate)
完成課程後,頒發完成時數證書,學員可隨時下載使用。 After completing the course, a certificate of completion hours will be issued.

學員評分和評論
還沒有評論