SolidWorks草圖繪製SOP(SolidWorks Sketch Drawing SOP) - 幾何科技

課程內容

1.環境介面(SolidWorks Interface)

本章說明SolidWorks和Windows環境設定，介面是直接看出能力的指標和顯學，會調整工作環境必定對工作自我要求，操作絕對俐落。介面調整是立竿見影效果建立敏銳度與觀察力。

0/10

1 草圖環境認知(solidworks Sketch Environment Tutorial)

1 啟動SolidWorks(Launch SolidWorks)

2 SolidWorks指令操作(SolidWorks Command Operations Tutorial)

3 塗鴉練習(SolidWorks Doodling Tutorial)

4 草圖-修剪與尺寸標註 (SolidWorks Sketch Trimming and dimension Tutorial)

6 SolidWorks選擇物件的認知(SolidWorks Cognition of the selection object Tutorial)

7 圓柱模型建構(SolidWorks Cylindrical model Tutorial)

8 長方形模型建構(SolidWorks Rectangular model Tutorial)

10 球模型建構(SolidWorks Sphere Model Tutorial)

11 橢圓模型建構(SolidWorks Ellipse Model Tutorial)

2.草圖(SolidWorks Parametric Sketching)

0/12

SolidWorks草圖繪製SOP(SolidWorks Sketch Drawing SOP)

2 草圖-法蘭墊片1 (SolidWorks Sketch Flange gasket 1 Tutorial)

3 草圖-魚叉(SolidWorks Sketch Harpoon Tutorial)

4 草圖-魚板 (SolidWorks Sketch Fish plate Tutorial)

5 草圖-菜刀(SolidWorks Sketch Kitchen knife Tutorial)

6 草圖-橡皮筋 (SolidWorks Sketch Rubber band Tutorial)

7 草圖-法蘭墊片2 (SolidWorks Sketch Flange gasket 2 Tutorial)

9 草圖-秤勾 (SolidWorks Sketch Hook scale Tutorial)

16 草圖-凸輪 (SolidWorks Sketch Cam Tutorial)

4 草圖-環狀複製排列-葉片(SolidWorks Sketch Blade Tutorial)

5 草圖-板手 (SolidWorks Sketch Wrench Tutorial)

6 草圖-連接板 (SolidWorks Sketch Link plate Tutorial)

3.零件基礎(SolidWorks Part)

伸長、旋轉、薄殼、肋、圓角

0/19

SolidWorks 模型建模SOP PPT (SolidWorks Modeling SOP Presentation and Downloads)

1 SolidWorks伸長特徵-底板(SolidWorks Extrusion Model-plate Tutorial)

2 SolidWorks伸長特徵-鈑金托架板(SolidWorks Feature-Extruded Sheetmetal plate Tutorial)

6 SolidWorks伸長特徵-中座 (SolidWorks Extrusion Model-Center base Tutorial)

7 SolidWorks伸長特徵-滑塊座 (SolidWorks Extrusion Model-Slider base Tutorial)

8 SolidWorks伸長特徵-六角螺帽 (SolidWorks Extrusion Model-Hex nut Tutorial)

9 SolidWorks伸長特徵-連結桿 ( SolidWorks Extrusion Model-Connecting rod Tutorial)

11 SolidWorks伸長特徵-軸心蓋 (SolidWorks Extrusion Model-Axle cap Tutorial)

2 SolidWorks旋轉特徵-手輪把手 (SolidWorks Revolve Model-handle Tutorial)

11 SolidWorks模型建構-直線複製排列-偏心軸(SolidWorks Model-Offset axis Tutorial)

8 SolidWorks模型建構-五角旋鈕(SolidWorks Feature-Circular Pattern knob Tutorial)

9 SolidWorks模型建構-法蘭(SolidWorks Model-Flange Tutorial)

7 SolidWorks模型建構-方形座(SolidWorks Model Square base Tutorial)

10 SolidWorks模型建構-滑輪(SolidWorks Model-Pulley Tutorial)

7 SolidWorks模型建構-六角板手(SolidWorks Model-lwrench Tutorial)

6 SolidWorks模型建構-滑鼠蓋(SolidWorks Model-Mouse cover)

2 SolidWorks模型建構-棘齒(SolidWorks Model-Ratchet Tutorial)

6 SolidWorks模型建構-實體(SolidWorks Model-Solid body Tutorial)

7 SolidWorks模型建構-齒輪減速機蓋(SolidWorks Model-Gear reducer cover Tutorial)

3-1.零件進階(SolidWorks Part)

掃出、3D草圖、螺旋、鑽孔、

0/25

2-1 管路製作 (Pipe Creation)

2-3 導引曲線之外型控制 (Shape Control of Guide Curve)

2-6 鎖棒 (Lock Rod)

3-2 螺旋曲線參數 (Parameters)

3-3 錐形螺線 (Tapered Helix)

3-4 渦捲線 (Spiral)

4-1 3D草圖先睹為快 (3D Sketch Preview)

4-2 3D管路製作 (3D Pipe Creation)

4-3 3D草圖框架 (3D Sketch Frame)

5-2 投影曲線 (Project Curve)

6-2 裝飾螺紋線 (Decorative Thread Line)

6-5 真實螺紋 (Real Thread)

7-0 螺紋特徵指令位置與介面 (Thread Feature Command Location and Interface)

8-1 簡易直孔 (Simple Straight Hole)

9-1 異型孔精靈指令位置與介面 (Hole Wizard Command Location and Interface)

9-6 柱孔-鑽孔類型 (Pillar Hole – Hole Type)

9-7 柱孔-鑽孔規格 (Pillar Hole – Hole Specification)

9-8 柱孔-終止型態 (Pillar Hole – End Condition)

9-9 柱孔-選項 (Pillar Hole – Options)

9-10 錐孔 (Tapered Hole)

9-11 鑽孔 (Drilled Hole)

9-12 直螺絲攻 (Straight Tap)

9-13 斜螺絲攻 (Inclined Tap)

9-14 舊制孔 (Old System Hole)

9-15 柱孔狹槽、錐孔狹槽、狹槽 (Pillar Hole Slot, Tapered Hole Slot, Slot)

3-2.零件進階(SolidWorks Part))

疊層拉伸、基準面、文字、草圖圖片、量測、物質特性、包覆、模型組態

0/25

11-0 疊層拉伸指令位置與介面 (Lofted Command Location and Interface)

12-1 2 草圖 (2 Sketches)

12-2 3 草圖 (3 Sketches)

12-3 輪廓順序 (Profile Order)

12-5 模型面斷差 (Model Surface Discrepancy)

12-6 草圖點 (Sketch Points)

12-7 模型邊線 (Model Edges)

12-8 中心線路徑 (Centerline Path)

12-11 水槽 (Sink)

13-0 移動複製指令位置與介面 (Move and Copy Command Location and Interface)

13-2 平移/旋轉 (Translate/Rotate)

15-0 基準面統一認知 (Unified Understanding of Reference Planes)

15-1 第1參考 (First Reference)

15-6 用畫的基準面 (Drawing Reference Planes)

16-0 草圖圖片指令位置與介面 (Sketch Pictures Command Location and Interface)

16-2 啟用縮放工具 (Enable Scaling Tool)

17-0 文字規劃與指令位置 (Text Planning and Command Location)

17-1 草圖文字作業 (Sketch Text Operations)

17-4 文字:繁體中文(Text:Traditional Chinese)

17-7 文字定位 (Text Alignment)

18-0 包覆指令位置與介面 ( Wrap Command Location and Interface)

19-0 量測指令位置與介面 (Measure Command Location and Interface)

19-6 量測單位/精度 ( Measure Units/Precision)

20-0 材質位置與功能表 (Material Location and Menu)

21-0 物質特性與剖面屬性介面與觀念 (Mass Properties and Section Properties Interface and Concepts)

4.組合件(SolidWorks Assembly)

0/19

第01章 SolidWorks組合件原理PPT (SolidWorks Assembly Principles PPT)

第02章 SolidWorks組合件-爆炸圖製作技術(PPT)(Exploded View Techniques)

第03章組合件組裝SOP (SolidWorks Assembly SOP)

第04章爆炸SOP (SolidWorks Explorer SOP)

第09章 SolidWorks組合件基礎組裝與爆炸製作 (Basic Assembly and Exploded View Creation)

第12章 SolidWorks組合件標準結合 (Standard Mates)

第13章 SolidWorks組合件進階結合 (Advanced Mates)

第14章 SolidWorks組合件機械結合 (Mechanical Mates)

第16章 SolidWorks組合件動態驗證-碰撞偵測 (Dynamic Verification – Collision Detection)

17章 SolidWorks組合件動態驗證-具體動態 (Dynamic Verification – Specific Dynamics)

第18章 SolidWorks組合件動態驗證-動態間隙 (Dynamic Verification – Dynamic Clearance)

第19章 SolidWorks組合件靜態驗證-干涉檢查 (Static Verification – Interference Check)

第20章 SolidWorks組合件靜態驗證-鑽孔對正 (Static Verification – Hole Alignment)

第21章 SolidWorks組合件靜態驗證-餘隙確認與評估 (Static Verification – Gap Confirmation and Evaluation)

20-1 直線複製排列 (Linear Pattern Replication)

20-2 環狀複製排列 (Circular Pattern Replication)

20-3 鏡射零組件 (Mirror Components)

20-4 曲線導出複製排列 (Curved Path Pattern Replication)

20-6 複製排列導出 (Pattern Replication Path)

5.工程圖前置學習(SolidWorks Drawings)

0/27

第01章工程圖原理-PPT-1-0-0 基礎篇

24-1 從零件產生工程圖 (Generate Engineering Drawing from Parts)

24-3 圖頁格式/大小視窗 (Drawing Page Format/Size Window)

24-4 視圖調色盤 (View Palette)

24-5 繪圖區域 (Drawing Area)

24-6 特徵管理員 (Feature Manager)

24-7 工具列 (Toolbar)

24-9 移動視圖 (Move View)

25-1 移動（移動圖頁）(Move Drawing Page)

25-2 拉近/拉遠 (Zoom In/Zoom Out)

25-4 最適當大小 (Best Fit)

25-7 3D工程視圖 (3D Engineering View)

27-1 狀態列控制比例 (Status Bar Control Scale)

27-2 視圖控制比例 (View Control Scale)

28-8 相切面交線 (Tangent Edges)

28-9 網路盒實務：相切面交線和導角C (Network Box Practice: Tangent Edges and Chamfers)

36-9 方法9 預先定義視圖 (Method 9: Predefined Views)

29-1 圖層工具列 (Layer Toolbar)

29-2 圖層清單 (Layer List)

29-3 圖層屬性與管理範圍 (Layer Properties and Management Scope)

29-4 新增圖層 (Add Layer)

29-6 圖層開關 (Layer Switch)

29-8 線條色彩 (Line Color)

29-9 樣式 (Style)

29-10 線條粗細 (Line Thickness)

29-13 自動化圖層 (Automated Layer)

29-15 查看圖層 (View Layers)

5-1.工程圖視圖製作(SolidWorks Drawings View)

0/10

31-1 模型項次 (Model Items)

31-2 尺寸組成 (Dimension Composition)

31-3 尺寸放置原則 (Dimension Placement Principles)

31-4 箭頭與尺寸數字同側 (Arrow and Dimension Number on Same Side)

31-5 搬移與複製尺寸 (Move and Copy Dimensions)

31-6 標註轉換 (Dimension Conversion)

31-7 尺寸位置 (Dimension Position)

31-8 修改尺寸 (Modify Dimensions)

31-11 取代值 (Override Value)

31-12 註解 (Annotations)

5-2 組合件工程圖製作 (Assembly Drawing Creation)

0/4

35-1 產生組合圖與爆炸圖 (Generate Assembly Drawing and Exploded View)

35-2 零件表製作 (Create Bill of Materials BOM)

35-3 零件號球 (Balloon Callouts)

35-5 編輯零件表 (Edit Bill of Materials)

5-3 常用視圖

0/8

37-1 投影視圖 (Projection View)

38-1 輔助視圖 (Auxiliary Views)

39-1 細部放大圖 (Detail Views)

40-1 斷裂視圖 (Broken Views)

41-1 剪裁視圖先睹為快 (Crop Views Quick Preview)

45-1 全剖視圖 (Full Section Views)

46-1 半剖視圖 (Half Section Views)

47-1 區域深度剖視圖(Local Depth Section Views)

5-4 註記(SolidWorks Annotation)

0/14

52-1 中心符號線：自動插入 (Auto-Insertion of Center Marks)

52-2 中心線與中心符號線手動插入選項 (Manual Insertion Options)

53-0 尺寸總類 (Types of Dimensions)

53-2 基準尺寸 (Baseline Dimensions)

53-4 座標尺寸 (Coordinate Dimensions)

53-6 角度運行尺寸 (Angular Running Dimensions)

53-7 導角尺寸 (Chamfer Dimensions)

53-8 路徑長度尺寸 (Path Length Dimensions)

51-1 區域剖面線 (Region Section Lines)

55-1 表面加工符號 (Surface Finish Symbols)

55-2 幾何公差 (Geometric Tolerances)

55-3 基準符號 (Datum Symbols)

55-7 熔接符號 (Weld Symbols)

55-12 鑽孔表格 (Hole Table)

5-4 工程圖製作與轉檔 (Creating Drawings File Conversion)

0/6

60-1 活動架 (Support Frame)

60-2 練習：彎管 (Exercise: Bent Tube)

60-3 固定鉗座 (Fixed Clamp Base)

58-1 儲存工程圖 (Saving Engineering Drawings)

58-2 另存DWG/DXF (Save as DWG/DXF)

58-3 PDF與3D PDF

快速學會的體驗課程 (含書)

關於單元

0% 完成