6 SolidWorks伸長特徵-中座 (SolidWorks Extrusion Model-Center base Tutorial) - 幾何科技

課程內容

第16章 SolidWorks 建模之草圖規則與型態【PPT】(SolidWorks Sketch Rules and Types in Modeling)

說明草圖影響特徵成形原因，草圖畫完→進行特徵時，草圖規則不合邏輯，系統出現訊息提示特徵無法成形原因，本章說明有順序性。

0/6

SolidWorks建模之草圖規則與型態 PPT簡報與下載 (SolidWorks Sketch Rules and Types in Modeling PPT Presentation and Downloads)

0 前言-SolidWorks建模之草圖規則與型態(SolidWorks Sketch Rules and Types in Modeling Preface)

1 SolidWorks標準輪廓(SolidWorks Sketch profiles)

2 SolidWorks訊息原理 (SolidWorks Information principles)

3 SolidWorks草圖錯誤輪廓 (SolidWorks Sketch Error profiles)

4 SolidWorks其他認知 (SolidWorks Other considerations)

第17章 SolidWorks模型建模SOP【PPT】(SolidWorks Modeling SOP)

看到圖先別急著畫，當下決定從哪開始建模，口訣：先填→後除→鑽孔→再導角，面對複雜模型不再恐懼如何下手。避免每人說法不一樣，造成初學者用聽說來建模。

0/4

SolidWorks 模型建模SOP PPT簡報與下載 (SolidWorks Modeling SOP PPT Presentation and Downloads)

1 SolidWorks模型第1特徵 (SolidWorks First feature of the model)

2 SolidWorks建模SOP(SolidWorks Modeling SOP)

3 SolidWorks 建模思維實務演練 (SolidWorks Modeling thinking practice)

第18章 SolidWorks視圖最佳草圖輪廓【PPT】(SolidWorks Best Sketch Profile for Views)

本章與上章關聯，由模型得到建模順序後，利用工程圖找到要的草圖輪廓與尺寸，這才是最難的，要有識圖能力才可勝任，藉由PPT認識圖學知識，配合圖學課本學習更好。

0/6

SolidWorks 視圖最佳草圖輪廓 PPT簡報與下載 (Best Sketch Profile for Views PPT Presentation and Downloads)

前言-SolidWorks視圖最佳草圖輪廓 (SolidWorks Best Sketch Profile for Views Preface)

1 SolidWorks建模基準面判斷(SolidWorks modeling datum plane judgment)

2 SolidWorks底部特徵建模判斷 (SolidWorks Base feature Modeling Judgment)

3 SolidWorks旋轉特徵建模判斷(SolidWorks Revolved feature Modeling Judgment)

4 SolidWorks 建模進階判斷 (SolidWorks Modeling Advanced judgment)

第19章 SolidWorks最佳模型顯示狀態【PPT】(SolidWorks Optimal Model Display States)

本節網羅模型面相利用實務案例，學會取捨視圖，在視圖只能留下一個情況下，就要做出最有利決定，決定留誰並提出見解，這些和圖學有關。

0/7

SolidWorks最佳模型顯示狀態 PPT簡報與下載 (SolidWorks Optimal Model Display States PPT Presentation and Downloads)

前言-SolidWorks最佳模型顯示狀態 (SolidWorks Optimal Model Display States Preface)

1 前後擺放(SolidWorks Front or back placement)

2 左右擺放 (SolidWorks Left or right placement)

3 上下擺放 (SolidWorks Top or bottom placement)

4 正面原則 (SolidWorks Front view principles)

5 實務討論(SolidWorks Practical discussion)

第20章 SolidWorks特徵-伸長填料與除料觀念 (SolidWorks Feature Concepts of Extruded Boss/Base and Cut)

伸長特徵（Extrued）將輪廓沿線方向成形（預設Z軸），定義終止形態達到你要位置。伸長包含：伸長填料、伸長除料，本章像字典說明每個選項表達什麼，未來記得到這查詢即可。

0/21

前言-SolidWorks特徵-伸長填料與除料觀念(SolidWorks Feature Concepts of Extruded Boss/Base and Cut Preface)

0 SolidWorks特徵-伸長特性 (SolidWorks Feature-Extrusion properties Tutorial)

1 SolidWorks特徵-伸長填料介面 (SolidWorks Feature-Extruded boss interface Tutorial)

2 SolidWorks伸長特徵-來自(SolidWorks Feature-Extrusion From Tutorial)

3 SolidWorks伸長特徵-方向1 (SolidWorks Feature-Extruded Direction 1 Tutorial)

4 SolidWorks伸長特徵-終止型態-給定深度 (SolidWorks Feature-Extruded End condition – Blind Tutorial)

5 SolidWorks伸長特徵-終止型態-完全貫穿 (SolidWorks Feature-End condition-Through all Tutorial )

6 SolidWorks伸長特徵-終止型態-完全貫穿-兩者(SolidWorks Feature-End condition-Through all (Both sides) Tutorial

7 SolidWorks伸長特徵-終止型態-成形至下一面 (SolidWorks Feature-End condition-Up to next Tutorial)

8 SolidWorks伸長特徵-終止型態-成形至一頂點 (SolidWorks Feature-End condition-Up to vertex Tutorial)

9 SolidWorks伸長特徵-終止型態-成形至某一面 (SolidWorks Feature-End condition-Up to surface Tutorial)

10 SolidWorks伸長特徵-終止型態-至某面平移處 (SolidWorks Feature-End condition-Offset from surface Tutorial)

11 SolidWorks伸長特徵-終止型態-兩側對稱 (SolidWorks Feature-End condition-Symmetric to both sides Tutorial)

12 SolidWorks伸長特徵-伸長方向(SolidWorks Feature-Extrusion direction Tutorial)

13 SolidWorks伸長特徵-反轉除料邊(SolidWorks Feature-Reverse material removal edge Tutorial)

14 SolidWorks伸長特徵-拔模(SolidWorks Feature-Extrusion Draft Tutorial)

15 SolidWorks伸長特徵-方向2(SolidWorks Feature-Extruded Direction2 Tutorial)

16 SolidWorks伸長特徵-薄件特徵 (SolidWorks Feature-Thin feature Tutorial)

17 SolidWorks伸長特徵-所選輪廓(SolidWorks Feature-Selected contour Tutorial)

18 SolidWorks伸長特徵-模型組態(SolidWorks Feature-Model configurations Tutorial)

19 SolidWorks伸長特徵-特徵加工範圍 (SolidWorks Feature-Feature scope Tutorial)

第21章 SolidWorks伸長特徵-基礎建模(SolidWorks Extrusion Modeling Tutorial)

驗證伸長特徵應用：1.加強空間認知、2.識圖能力（由工程圖找出草圖輪廓或尺寸）、3.建模SOP、4.草圖與模型的限制條件與尺寸關係、5.提早面對企業要求：模組化。

0/19

前言-SolidWorks伸長特徵-基礎建模(SolidWorks Extrusion Modeling Tutorial)

1 SolidWorks伸長特徵-底板(SolidWorks Extrusion Model-plate Tutorial)

2 SolidWorks伸長特徵-鈑金托架板(SolidWorks Feature-Extruded Sheetmetal plate Tutorial)

3 SolidWorks伸長特徵-鏈節 (SolidWorks Feature-Extruded Chain link Tutorial)

4 SolidWorks伸長特徵-桿導引器 (SolidWorks Extrusion Model-Rod guide Tutorial)

5 SolidWorks伸長特徵-搖臂(SolidWorks Extrusion Model-Rocker arm Tutorial)

6 SolidWorks伸長特徵-中座 (SolidWorks Extrusion Model-Center base Tutorial)

7 SolidWorks伸長特徵-滑塊座 (SolidWorks Extrusion Model-Slider base Tutorial)

8 SolidWorks伸長特徵-六角螺帽 (SolidWorks Extrusion Model-Hex nut Tutorial)

9 SolidWorks伸長特徵-連結桿 ( SolidWorks Extrusion Model-Connecting rod Tutorial)

10 SolidWorks伸長特徵-房屋(SolidWorks Extrusion Model-Housing Tutorial)

11 SolidWorks伸長特徵-軸心蓋 (SolidWorks Extrusion Model-Axle cap Tutorial)

12 SolidWorks伸長特徵-轉向座 (SolidWorks Extrusion Model- seat TutorialSteering)

13 SolidWorks伸長特徵-底座板 (SolidWorks Extrusion Model- Base plate Tutorial)

14 SolidWorks伸長特徵-惰輪臂 (SolidWorks Extrusion Model-Idler arm Tutorial)

15 SolidWorks伸長特徵-軸承蓋 (SolidWorks Extrusion Model- Bearing cap Tutorial)

16 SolidWorks伸長特徵-夾板 (SolidWorks Extrusion Model- Clamp plate Tutorial)

17 SolidWorks伸長特徵-活塞連桿(SolidWorks Extrusion Model-Piston rod Tutorial)

18 SolidWorks伸長特徵-C架 (SolidWorks Extrusion Model-frame Tutorial)

第22章 SolidWorks 特徵旋轉填料與除料觀念 (SolidWorks Concepts of Revolved Boss/Base and Cut)

輪廓以中心線為基準旋轉（Revolve）成形，旋轉包含：旋轉填料、旋轉除料，本章就像字典說明每個項目表達什麼，學習過程有問題到這查詢即可。

0/8

前言-SolidWorks 特徵旋轉填料與除料觀念 (SolidWorks Concepts of Revolved Boss/Base and Cut)

0 SolidWorks旋轉特徵-旋轉特性 (SolidWorks Revolve properties Tutorial)

1 SolidWorks特徵-旋轉填料/除料介面 (SolidWorks Revolved boss/cut interface Tutorial)

2 SolidWorks旋轉特徵-旋轉軸 (SolidWorks Revolve Axis of revolution Tutorial)

3 SolidWorks旋轉特徵-方向1 (SolidWorks Revolve-Direction 1 Tutorial)

4 SolidWorks旋轉特徵-方向2 (SolidWorks Revolve-Direction 2 Tutorial)

5 SolidWorks旋轉特徵-薄件特徵 (SolidWorks Revolve-Thin feature Tutorial)

6 SolidWorks旋轉特徵-所選輪廓 (SolidWorks Revolve-Selected contour Tutorial)

第23章 SolidWorks旋轉模型建構 (SolidWorks Revolve Applications Tutorial)

輪廓以中心線為基準旋轉（Revolve）成形，旋轉包含：旋轉填料、旋轉除料，本章就像字典說明每個項目表達什麼，學習過程有問題到這查詢即可。

0/9

0 前言-SolidWorks特徵-旋轉建模 (SolidWorks Feature Revolve Preface)

1 SolidWorks旋轉特徵-LED燈 (SolidWorks Revolve Model-LED lamp Tutorial)

2 SolidWorks旋轉特徵-手輪把手 (SolidWorks Revolve Model-handle Tutorial)

3 SolidWorks旋轉特徵-階級軸 (SolidWorks Revolve Model-Stepped shaft Tutorial)

4 SolidWorks旋轉特徵-球型桿 (SolidWorks Revolve Model-Ball rod Tutorial)

5 SolidWorks旋轉特徵-門把 (SolidWorks Revolve Model- Door handle Tutorial)

6 SolidWorks旋轉特徵-酒杯(SolidWorks Revolve Model-Wine glass Tutorial)

7 SolidWorks旋轉特徵-吊環螺栓 (SolidWorks Revolve Model-Eye bolt Tutorial)

8 SolidWorks旋轉特徵-圓錐形把手 (SolidWorks Revolve Model-Conical handle Tutorial)

第24章 SolidWorks特徵-直線複製排列與模型建構 (SolidWorks Feature – Linear Pattern Tutorial)

特徵直線複製排列（Linear Pattern），複製排列減少建模時間，將特徵指定：1.方向、2.間距、3.數量。本章與草圖複製排列觀念和操作相通，差別在特徵或草圖，可以減少學習時間。本章後面有練習題，體驗複製排列熟悉度和另一種思考方式。

0/13

前言SolidWorks特徵-直線複製排列 (SolidWorks Feature – Linear Pattern Preface)

0 SolidWorks特徵-直線複製排列指令位置與介面 (Linear pattern command location and interface)

1 SolidWorks特徵-直線複製排列-方向1 (SolidWorks Feature-Linear pattern-Direction 1)

2 SolidWorks特徵-直線複製排列-間距和副本 (SolidWorks Feature-Linear pattern-Spacing and instances)

3 SolidWorks特徵-直線複製排列-成形至的參考 (SolidWorks Feature-Linear pattern-Reference for “Up to”)

4 SolidWorks特徵-直線複製排列-方向2(SolidWorks Feature-Linear pattern-Direction 2)

5 SolidWorks特徵-直線複製排列-特徵和面 (SolidWorks Feature-Linear pattern-Features and faces)

6 SolidWorks特徵-直線複製排列-本體 (SolidWorks Feature-Linear pattern Bodies)

7 SolidWorks特徵-跳過之副本 (SolidWorks Feature-Linear pattern-Skipped instances)

8 SolidWorks特徵-特徵加工範圍(SolidWorks Feature-Linear pattern-Feature scope)

9 SolidWorks特徵-直線複製排列-選項 (SolidWorks Feature-Linear pattern Options)

10 SolidWorks特徵-直線複製排列-要變化的副本(SolidWorks Feature-Linear pattern Vary instances)

11 SolidWorks模型建構-直線複製排列-偏心軸(SolidWorks Model-Offset axis Tutorial)

第25章 SolidWorks特徵-環狀複製排列與模型建構 (SolidWorks Feature – Circular Pattern Tutorial)

特徵環狀複製排列（Circular Pattern），將特徵指定：1.旋轉基準、2.角度間距、3.數量，減少建模時間。觀念與草圖環狀複製排列相通，差別在特徵或草圖，可以減少學習時間。本章後面有練習題，體驗複製排列熟悉度和另一種思考方式。

0/11

前言 SolidWorks特徵-環狀複製排列(SolidWorks Feature-Circular Pattern Preface)

0 SolidWorks特徵-環狀複製排列介面 (Circular pattern interface)

1 SolidWorks特徵-環狀複製排列-方向1 (SolidWorks Feature-Circular Pattern-Direction 1 Tutorial)

2 1 SolidWorks特徵-環狀複製排列-方向2(SolidWorks Feature-Circular Pattern-Direction 2 Tutorial)irection 2)

3 SolidWorks特徵-環狀複製排列–特徵和面 (SolidWorks Feature-Circular PatternFeatures and faces)

4 SolidWorks特徵-環狀複製排列-本體 (SolidWorks Feature-Circular Pattern-Bodies)

5 SolidWorks特徵-環狀複製排列-跳過之副本(SolidWorks Feature-Circular Pattern-Skipped instances)

6 SolidWorks特徵-環狀複製排列-特徵加工範圍 (SolidWorks Feature-Circular Pattern -scope)

7 SolidWorks特徵-環狀複製排列-變化副本(SolidWorks Feature-Circular Pattern-Vary instances)

8 SolidWorks模型建構-五角旋鈕(SolidWorks Feature-Circular Pattern knob Tutorial)

9 SolidWorks模型建構-法蘭(SolidWorks Model-Flange Tutorial)

第26章 SolidWorks特徵-鏡射 (SolidWorks Feature – Mirror)

特徵鏡射（Mirror），將部分特徵或一半的模型指定基準面鏡射，減少建模時間。鏡射的想法就是對稱或一半，不用畫2遍，觀念與草圖複製排列相通，差別在特徵或草圖，可以減少學習時間。

0/12

0 前言 SolidWorks特徵-鏡射(SolidWorks Feature-Mirror Preface)

0 SolidWorks特徵-鏡射指令位置與介面 (SolidWorks Feature-Mirror command location and interface)

1 SolidWorks特徵-鏡射面/基準面 (SolidWorks Feature-Mirror plane/Reference plane)

2 SolidWorks特徵-第2鏡射面基準面(SolidWorks Feature-Mirror Second mirror plane reference)

3 SolidWorks特徵-鏡射特徵(SolidWorks Feature-Mirror feature)

4 SolidWorks特徵-鏡射之面 (SolidWorks Feature-Mirror-Mirror face)

5 SolidWorks特徵-鏡射本體(SolidWorks Feature-Mirror-Mirror body)

6 SolidWorks特徵-選項(SolidWorks Feature-Mirror-Options)

7 SolidWorks模型建構-方形座(SolidWorks Model Square base Tutorial)

8 SolidWorks模型建構-H架座 (SolidWorks Model-frame Tutorial)

9 SolidWorks模型建構-V形皮帶輪 (SolidWorks Model-belt pulley Tutorial)

10 SolidWorks模型建構-滑輪(SolidWorks Model-Pulley Tutorial)

第27章 SolidWorks薄殼特徵(SolidWorks Feature Thin)

薄殼（Shell）產生厚度一致的殼體，常用在中空物，讓物體變輕、成為容器。計算所選面，產生偏移與除料作業與草圖的觀念相近。

0/12

前言-SolidWorks特徵-薄殼(SolidWorks Feature-Thin Preface)

0 SolidWorks特徵-薄殼指令位置與介面(SolidWorks Feature-Thin feature command location and interface)

1 SolidWorks特徵-薄殼-參數(SolidWorks Feature-Thin-Parameters)

2 SolidWorks特徵-薄殼-不等殼厚設定(SolidWorks Feature-Thin Unequal shell thickness settings)

3 SolidWorks特徵-薄殼-錯誤診斷(SolidWorks Feature-Thin-Error diagnosis)

4 SolidWorks特徵-薄殼-移除面應用(SolidWorks Feature-Thin -Remove face application)

5 SolidWorks特徵-薄殼-圓角與薄殼(SolidWorks Feature-Thin-Fillet and thin shell)

6 SolidWorks模型建構-ㄈ型座 (SolidWorks Model-base Tutoria)

7 SolidWorks模型建構-六角板手(SolidWorks Model-lwrench Tutorial)

8 SolidWorks模型建構-花瓶(SolidWorks Model-Vase Tutorial)

9 SolidWorks模型建構-活塞(SolidWorks Model-Piston Tutorial)

10 SolidWorks模型建構-感應器上蓋(SolidWorks Model-Sensor cover Tutorial)

第28章 SolidWorks肋材特徵 (SolidWorks Feature-Rib)

肋材（Rib，簡稱肋）用於增加結構強度、節省材料，肋草圖常為開放輪廓，例如：1條斜線完成薄件厚度。

0/16

0 前言-SolidWorks肋材特徵(SolidWorks Feature-Rib Preface)

0 SolidWorks特徵-肋材指令位置與介面 (SolidWorks Feature-Rib-command location and interface)

1 lidWorks特徵-肋-參數-肋材厚度(SolidWorks Feature-Rib-Parameter-Rib thickness)

2 SolidWorks特徵-肋-參數-伸長方向(SolidWorks Feature-Rib-Parameter – Extrusion direction)

3 SolidWorks特徵-肋-參數-拔模角(SolidWorks Feature-Rib-Parameter-Draft angle)

4 SolidWorks特徵-肋-參數-類型(SolidWorks Feature-Rib-Parameter-Type)

5 SolidWorks特徵-肋-所選輪廓(SolidWorks Feature-Rib-Selected contour)

6 SolidWorks模型建構-滑鼠蓋(SolidWorks Model-Mouse cover)

7 SolidWorks模型建構-鎖座(SolidWorks Model-Lock base Tutorial)

8 SolidWorks模型建構-蓋板(SolidWorks Model-Cover plate Tutorial)

9 SolidWorks模型建構-吹風機(SolidWorks Model-Blower Tutorial)

10 SolidWorks模型建構-斜座(SolidWorks Model-Inclined base Tutorial)

11 SolidWorks模型建構-軸承座(SolidWorks Model-Bearing seat Tutorial)

12 SolidWorks模型建構-鳩尾槽(SolidWorks Model-Dovetail groove Tutorial)

13 SolidWorks模型建構-托盤(SolidWorks Model-Tray Tutorial)

14 SolidWorks模型建構-風車(SolidWorks Model-Windmill Tutorial)

第29章 SolidWorks進階建模 (SolidWorks Advanced Modeling)

本章為美國原廠公布的認證範例與電腦輔助機械設計製圖丙級題型，題目比較難，解題和先前不同比較靈活，學習另一種畫法。

0/13

0 前言SolidWorks模型建構(SolidWorks Advanced Modeling Preface)

1 SolidWorks模型建構-雙軸心座(SolidWorks Model-base Tutorial)

2 SolidWorks模型建構-棘齒(SolidWorks Model-Ratchet Tutorial)

3 SolidWorks模型建構-固定鉗座(SolidWorks Model-clamp base Tutorial)

4 SolidWorks模型建構-座蓋(SolidWorks Model-Seat cover Tutorial)

5 SolidWorks模型建構-偏置支架(SolidWorks Model-bracket Tutorial)

6 SolidWorks模型建構-實體(SolidWorks Model-Solid body Tutorial)

7 SolidWorks模型建構-齒輪減速機蓋(SolidWorks Model-Gear reducer cover Tutorial)

8 SolidWorks模型建構-控制屐(SolidWorks Model-Control shoe Tutorial)

9 SolidWorks模型建構-C形夾(SolidWorks Model-C-clamp Tutorial)

10 SolidWorks進階模型建構-托架(SolidWorks Model-Bracket Tutorial)

11 SolidWorks模型建構-虎鉗夾(SolidWorks Model-Vise clamp Tutorial)

12 SolidWorks模型建構-軸心座(SolidWorks Model-Axle base Tutorial)

測驗【第02週 SolidWorks基礎零件:3D建模與特徵】

完成25題測驗，滿足12點配分(90%)為合格，有重考5次的機會，祝各位考試愉快

0/1

第2週基礎零件考試

第02週 SolidWorks基礎零件:3D建模與特徵(SolidWorks 3D Modeling and Tutorial)

本題重點：1.識圖判斷、2.限制條件的穩定、3.薄件特徵、4.鏡射草圖。

21-6-0 繪圖步驟

21-6-1 主體特徵

21-6-2 方形除料草圖

21-6-3 方形除料特徵

21-6-4 鑽孔特徵

21-6-5 圓角特徵，多重半徑圓角

0% 完成